Cyberpunk Technical Bomber Jacket

PROTECTED WARDROBE RULE — HIGHEST PRIORITY: Treat each garment description as immutable source identity. Preserve construction, parts, hardware, material, pattern, and every registered graphic or marking—its surface, side, orientation, scale, colors, content, spelling, and count—unless a later instruction explicitly changes color, material, or wearing state. A MATERIAL CHANGE substitutes only the explicitly scoped source material phrase and preserves every other garment attribute. FINAL WORN STATE overrides only the scoped item's use, position, side, orientation, fastening, layering, folds, tucks, knots, and drape. A SOURCE GARMENT label describes the unstyled item, never the completed silhouette. Do not redesign, add, remove, mirror, duplicate, relocate, or redraw protected details.

Wardrobe:

Outerwear / layers:

One oversized upper-thigh-length technical bomber jacket in high-gloss hot fuchsia, glossy neutral black, vivid teal, silver gray, muted yellow, and small white accents. Shape the jacket with a broad boxy body, a broad layered upper-opening band, lowered shoulder lines, two extremely voluminous balloon sleeves, and an open center front. Construct the exterior torso from smooth black panels and build both sleeves from hot-fuchsia coated shell sections gathered into deep rounded folds. Finish each sleeve with a wide hot-fuchsia rib-knit cuff. Reinforce both shoulder yokes and outer upper sleeves with layered black panels, curved rails, narrow straps, small dark rings, silver-gray grids, hot-pink blocks, muted-yellow marks, and compact non-text block-and-line graphics arranged as dense irregular collage appliques. Set one black-bordered rounded utility panel with a translucent glossy pink window into the outer face of the wearer's left upper sleeve and retain the short black tabs and small dark fasteners fixed along that panel's edges; keep the outer reinforcement of the wearer's right upper sleeve free of a matching window panel. Line the inner front and side areas with vivid teal cloth formed into large elongated diamond-like quilt channels. Set one broad teal quilted rectangular field across the lower rear and mount one large centered hot-fuchsia raised armored utility panel over it, framing the panel with black corner reinforcements and one compact raised black rectangular mount. Extend one slim teal webbing tab from each lower front corner and finish each open free end with a compact black reinforced terminal. Install one full separating front zipper with cool-silver teeth, dark tape, one dark slider, and one narrow functional pull. Use medium-thick coated shell material with sharp wet-look reflections, soft compression creases, and resilient volume; cushioned rib knit at the cuffs; evenly padded low-luster teal quilting; clean edge binding; dense attachment stitching; and crisp separation among every exterior panel, applique, and lining zone.

Final worn state:
- Shoulder / neckline / straps: Final state: both arms remain inside their original sleeves. Both shoulder seams and the connected collar or lapels rest below their corresponding shoulder points on the proximal outer upper arms, which support the garment. The garment body stays continuous, and its separately selected front closure remains unchanged.
- Finish — Relaxed: Keep the selected anchor secure while allowing broad gravity-led slack, loose unequal hanging sections, and a few large collapsed volumes without changing the garment's role.

Top: One fitted cropped camisole top in soft cool white, neutral black, and translucent silver gray. Shape the garment with a straight compact torso, a shallow nearly level upper edge, two narrow fixed black shoulder straps, and a short segmented lower boundary. Build the front with one broad soft-white center section divided by a vertical center join and several close narrow raised pintuck channels. Set one smooth convex black bust panel into each side of this center section and continue both black side sections rearward into a simple flexible back structure. Taper the wearer's right black side panel into one pointed lower tab and place one small cool-silver round rivet near that tab's terminal. Finish the white center section as several adjacent rectangular lower flaps of slightly varied length, including one narrow translucent silver-gray patterned extension beneath the wearer's left lower-front flap. Finish the white upper edge with narrow self-colored edge treatment and bind both black arm openings with slim black edging. Use lightweight opaque white technical cloth with a fine vertical grain, crisp narrow folds, and low diffuse luster; smooth black coated stretch material with softly rounded specular highlights and firm recovery; a translucent silver-gray patterned panel; precise tonal stitching; and clean color boundaries.

Bottom: One pair of fitted very-short soft cool-white shorts with a compact close silhouette, two equal short legs, and narrow level lower edges. Construct the front from two main panels joined through one center-front seam, then shape each upper-front quarter with one shallow curved panel seam and continue the structure through two side seams into two smooth rear panels. Finish the upper boundary as one narrow continuous self-fabric stretch edge and complete each leg opening with one slim straight turnback hem. Place one tiny dark angular stitched mark on the wearer's left upper-front panel and distribute a few isolated small dark and cool-silver round rivets along selected front seam junctions. Add one unilateral black suspender assembly at the wearer's right lower-front and lower-side edge: two narrow straps descend from separate black anchor modules, pass through compact rectangular fittings, and end in small black connector tabs. Keep the wearer's left lower edge free of a corresponding strap assembly. Use medium-lightweight opaque stretch technical cloth with a smooth face, low satin sheen, firm shape recovery, shallow tension folds, pale gray tonal topstitching, and clean narrow seam relief.

Legwear:

One matching pair of short bubblegum-pink rib-knit socks with two separate anatomically mirrored members. Give each sock a straight cushioned tube, one deep full-circuit cuff turned outward once, and one simple closed foot formed from the same knit. Work the complete product in dense vertical ribs and compress the rib spacing gently through the turned cuff. Fix one small matte-black irregular rounded emblem applique with an indistinct darker center mark to the outer face of each cuff at the same height. Use thick soft pink yarn with clearly resolved ribs, a faint fuzzy halo, low diffuse luster, rounded compression, resilient stretch recovery, and corresponding color, cuff depth, emblem scale, and construction across the pair except for anatomical mirroring.

One deliberately single deep smoky plum-black thigh-high stocking with a long close tapered tube, one narrow level upper edge, and one simple closed foot formed from the same knit. Finish the upper opening with one slim self-knit elasticized edge and continue the stocking as one smooth uninterrupted unpatterned section that narrows gradually toward the lower end. Use fine-gauge semi-sheer stretch knit with dense even stitches, uniform plum-black color, soft elastic recovery, a restrained satin haze, and subtle tonal depth across the single-color field.

Final worn state:
For the second item description above only:
VIEW-CONDITIONAL BODY-SIDE MAP: front view — wearer-left is image-right; back view — wearer-left is image-left. In profiles, crossed limbs, or ambiguity, trace the named limb continuously from its shoulder or hip. Apply the state only to the named anatomical side; never mirror or duplicate it.
- Layering: Layer this legwear underneat

PROTECTED WARDROBE RULE — HIGHEST PRIORITY: Treat each garment description as immutable source identity. Preserve construction, parts, hardware, material, pattern, and every registered graphic or marking—its surface, side, orientation, scale, colors, content, spelling, and count—unless a later instruction explicitly changes color, material, or wearing state. A MATERIAL CHANGE substitutes only the explicitly scoped source material phrase and preserves every other garment attribute. FINAL WORN STATE overrides only the scoped item's use, position, side, orientation, fastening, layering, folds, tucks, knots, and drape. A SOURCE GARMENT label describes the unstyled item, never the completed silhouette. Do not redesign, add, remove, mirror, duplicate, relocate, or redraw protected details.

Wardrobe:

Outerwear / layers:

One oversized upper-thigh-length technical bomber jacket in high-gloss hot fuchsia, glossy neutral black, vivid teal, silver gray, muted yellow, and small white accents. Shape the jacket with a broad boxy body, a broad layered upper-opening band, lowered shoulder lines, two extremely voluminous balloon sleeves, and an open center front. Construct the exterior torso from smooth black panels and build both sleeves from hot-fuchsia coated shell sections gathered into deep rounded folds. Finish each sleeve with a wide hot-fuchsia rib-knit cuff. Reinforce both shoulder yokes and outer upper sleeves with layered black panels, curved rails, narrow straps, small dark rings, silver-gray grids, hot-pink blocks, muted-yellow marks, and compact non-text block-and-line graphics arranged as dense irregular collage appliques. Set one black-bordered rounded utility panel with a translucent glossy pink window into the outer face of the wearer's left upper sleeve and retain the short black tabs and small dark fasteners fixed along that panel's edges; keep the outer reinforcement of the wearer's right upper sleeve free of a matching window panel. Line the inner front and side areas with vivid teal cloth formed into large elongated diamond-like quilt channels. Set one broad teal quilted rectangular field across the lower rear and mount one large centered hot-fuchsia raised armored utility panel over it, framing the panel with black corner reinforcements and one compact raised black rectangular mount. Extend one slim teal webbing tab from each lower front corner and finish each open free end with a compact black reinforced terminal. Install one full separating front zipper with cool-silver teeth, dark tape, one dark slider, and one narrow functional pull. Use medium-thick coated shell material with sharp wet-look reflections, soft compression creases, and resilient volume; cushioned rib knit at the cuffs; evenly padded low-luster teal quilting; clean edge binding; dense attachment stitching; and crisp separation among every exterior panel, applique, and lining zone.

Final worn state:
- Shoulder / neckline / straps: Final state: both arms remain inside their original sleeves. Both shoulder seams and the connected collar or lapels rest below their corresponding shoulder points on the proximal outer upper arms, which support the garment. The garment body stays continuous, and its separately selected front closure remains unchanged.
- Finish — Relaxed: Keep the selected anchor secure while allowing broad gravity-led slack, loose unequal hanging sections, and a few large collapsed volumes without changing the garment's role.

Top: One fitted cropped camisole top in soft cool white, neutral black, and translucent silver gray. Shape the garment with a straight compact torso, a shallow nearly level upper edge, two narrow fixed black shoulder straps, and a short segmented lower boundary. Build the front with one broad soft-white center section divided by a vertical center join and several close narrow raised pintuck channels. Set one smooth convex black bust panel into each side of this center section and continue both black side sections rearward into a simple flexible back structure. Taper the wearer's right black side panel into one pointed lower tab and place one small cool-silver round rivet near that tab's terminal. Finish the white center section as several adjacent rectangular lower flaps of slightly varied length, including one narrow translucent silver-gray patterned extension beneath the wearer's left lower-front flap. Finish the white upper edge with narrow self-colored edge treatment and bind both black arm openings with slim black edging. Use lightweight opaque white technical cloth with a fine vertical grain, crisp narrow folds, and low diffuse luster; smooth black coated stretch material with softly rounded specular highlights and firm recovery; a translucent silver-gray patterned panel; precise tonal stitching; and clean color boundaries.

Bottom: One pair of fitted very-short soft cool-white shorts with a compact close silhouette, two equal short legs, and narrow level lower edges. Construct the front from two main panels joined through one center-front seam, then shape each upper-front quarter with one shallow curved panel seam and continue the structure through two side seams into two smooth rear panels. Finish the upper boundary as one narrow continuous self-fabric stretch edge and complete each leg opening with one slim straight turnback hem. Place one tiny dark angular stitched mark on the wearer's left upper-front panel and distribute a few isolated small dark and cool-silver round rivets along selected front seam junctions. Add one unilateral black suspender assembly at the wearer's right lower-front and lower-side edge: two narrow straps descend from separate black anchor modules, pass through compact rectangular fittings, and end in small black connector tabs. Keep the wearer's left lower edge free of a corresponding strap assembly. Use medium-lightweight opaque stretch technical cloth with a smooth fine face, low satin sheen, firm shape recovery, shallow tension folds, pale gray tonal topstitching, and clean narrow seam relief.

Legwear:

One matching pair of short bubblegum-pink rib-knit socks with two separate anatomically mirrored members. Give each sock a straight cushioned tube, one deep full-circuit cuff turned outward once, and one simple closed foot formed from the same knit. Work the complete product in dense vertical ribs and compress the rib spacing gently through the turned cuff. Fix one small matte-black irregular rounded emblem applique with an indistinct darker center mark to the outer face of each cuff at the same height. Use thick soft pink yarn with clearly resolved ribs, a faint fuzzy halo, low diffuse luster, rounded compression, resilient stretch recovery, and corresponding color, cuff depth, emblem scale, and construction across the pair except for anatomical mirroring.

One deliberately single deep smoky plum-black thigh-high stocking with a long close tapered tube, one narrow level upper edge, and one simple closed foot formed from the same knit. Finish the upper opening with one slim self-knit elasticized edge and continue the stocking as one smooth uninterrupted unpatterned section that narrows gradually toward the lower end. Use fine-gauge semi-sheer stretch knit with dense even stitches, uniform plum-black color, soft elastic recovery, a restrained satin haze, and subtle tonal depth across the single-color field.

Final worn state:
For the second item description above only:
VIEW-CONDITIONAL BODY-SIDE MAP: front view — wearer-left is image-right; back view — wearer-left is image-left. In profiles, crossed limbs, or ambiguity, trace the named limb continuously from its shoulder or hip. Apply the state only to the named anatomical side; never mirror or duplicate it.
- Layering: Layer this legwear underneat