Skip to main content
Guide9 min read

Image to Video vs Video to Video: Which Input Should You Use?

Image to video invents new motion from a still. Video to video keeps the motion of a clip you already have and changes what is in it. How to choose, with examples and costs.

VdoBloom Team

Contents (8 sections)

Use image to video when you have a picture and need motion that does not exist yet. Use video to video when you already have a clip whose movement, timing and camera you want to keep, and you only want to change what is in it. In VdoBloom, the first job is Image to Video. The second is split across three VdoBloom tools: the AI Video Editor for typed changes, Object Swap for swapping labelled things, and Character Replacement for swapping the person.

Quick facts

  • Image to video: one still (or a first and last frame) plus a prompt. The model invents the motion. Example cost: 28 credits for 5 seconds at 480p on Seedance 2.5 Flash.
  • Video to video, typed edit: FLUX Video Edit [fast] in the AI Video Editor keeps the source motion, timing, framing and audio. 2.4 credits per second, for clips of 2 to 10 seconds.
  • Video to video, object swap: a 4 to 30 second clip plus up to 10 labelled photos. About 6.8 credits per clip second at 480p, 15.2 at 720p, 38 at 1080p.
  • Video to video, person swap: a clip plus one photo. From 24 credits a job on P-Video Replace at 720p.
  • Rule of thumb: if the motion matters more than the look, start from video. If the look matters more than the motion, start from an image.

Open Image to Video

The difference in one table

Image to videoVideo to video
What you give itA still image and a promptA clip, plus a prompt or reference photos
Where the motion comes fromThe model invents itYour clip
What you control mostThe exact look of the first frameThe exact movement, timing and camera
What you control leastHow things moveThe camera path, which stays as filmed
LengthSet by you, within the model's rangeFollows the source clip
How it is billedBy output length and resolutionMostly per second of the source clip
Typical useBring a product photo, portrait or artwork to lifeChange a product, outfit, person or style in footage you shot

What image to video does well

Image to video starts from one frame you choose. That gives you full control of how the clip looks at the first moment: the product, the face, the colors, the framing. The model then adds movement from your prompt.

  • You have no footage. A product photo, a painting, an AI image or an old family picture is enough.
  • The look must be exact. A label, a logo or a character design is already right in the image, so the clip starts right.
  • The motion is simple or can be described. A slow push in, hair moving in the wind, steam rising, a person turning to smile.
  • You want an exact ending too. Some models accept a last frame as well as a first, so the clip lands on a picture you chose. VdoBloom's Morph Video is built on this.

The weak point is complex movement. If you need a specific dance, a precise hand action or the timing of a real performance, describing it in words is hit and miss.

Code
The woman in the photo turns her head toward the window and smiles.
Slow push in, soft daylight from the left. Quiet room, no music.

With an image, do not describe the picture again. The model can see it. Use the prompt for what happens next. Our image-to-video prompt examples has more patterns.

What video to video does well

Video to video starts from a clip. The movement, the timing and the camera path are already there, filmed by you. The model changes what you ask for and is told to leave the rest.

  • The performance is good and one thing is wrong. The wrong product on the table, last season's jacket, a prop you want gone.
  • You cannot reshoot. The location is gone, the actor is not available, or the day cost too much to repeat.
  • You need versions. The same ad with three product colors, or the same dance with a different character.
  • The motion is too specific for a prompt. A real dance take or a real demonstration carries timing no prompt will match.

The weak point is the camera. It stays as filmed. Video to video will not give you a new angle or a different lens.

Three kinds of video to video on VdoBloom

"Video to video" covers different jobs. Pick the tool by what you want to change.

JobToolWhat you uploadCost
Change something by typing itAI Video Editor, FLUX Video Edit [fast]A 2 to 10 second clip and an instruction2.4 credits per second
Swap a product, outfit, prop or locationObject SwapA 4 to 30 second clip and up to 10 labelled photosAbout 6.8, 15.2 or 38 credits per second at 480p, 720p or 1080p
Swap the personCharacter ReplacementA clip and one photo of the new personFrom 24 credits a job (P-Video Replace, 720p)

Typed edits: the AI Video Editor

Upload a short clip and write the change: "make the car red", "turn the daytime street into night", "restyle as a watercolor painting". FLUX Video Edit [fast] is described as keeping the source's motion, timing, framing and audio. It works on clips of 2 to 10 seconds and is billed at 2.4 credits per second, so a 5-second edit is 12 credits. The same page lists other edit models for jobs with reference images or subject replacement.

Labelled swaps: Object Swap

Upload a clip of 4 to 30 seconds and add a photo for each thing to change, with a label that says what it replaces. There are two presets. Object Swap changes the labelled things, such as a product, an outfit or a prop, and leaves the scene. Motion Transfer keeps every person and move, and rebuilds the location from your photos. It runs on Seedance 2.5 in edit mode. The output is as long as your clip and in its shape, at 480p, 720p or 1080p. A 5-second clip costs about 68, 152 or 380 credits depending on the resolution, and a job takes about four to seven minutes.

Person swaps: Character Replacement

Upload the clip and one photo of the new character. The tool re-renders the footage with that person doing every move. Each job is billed as a flat 10-second estimate: P-Video Replace is 24 credits at 720p or 48 at 1080p, WAN 2.2 Animate Replace is 60, 95 or 125 credits at 480p, 580p or 720p, and Kling 3.0 Motion Control is 91 or 121 at 720p or 1080p. Only use photos of people who agreed to it.

Which input for which job

You want toUseWhy
Animate a product photo for an adImage to videoThe label is already correct in the photo
Show the same ad with a new product colorVideo to video (Object Swap)The shot stays, only the product changes
Make a portrait smile or waveImage to videoSimple motion that a prompt can describe
Put a different character on a real dance takeVideo to video (Character Replacement)The dance timing comes from the clip
Turn day into night in a clipVideo to video (AI Video Editor)The scene and motion stay as filmed
Show a room before and afterImage to video with two frames (Morph Video)You have two photos, not a clip
Get a new camera angle on a sceneImage to videoVideo to video keeps the original camera
Restyle a short clip as animationVideo to video (AI Video Editor)The movement is kept, the look changes

Using both together

The two inputs are steps you can chain.

  1. Image first, then video edit. Make the base clip with VdoBloom's Image to Video. If one detail comes out wrong, fix that detail with a video edit and keep the take.
  2. Video first, then a still. Take a frame from your real footage, edit it in the VdoBloom Photo Editor, and use the edited frame as the first frame of a new clip.
  3. One master, many versions. Make or film one good clip, then use Object Swap to produce the color and product variants.

Common mistakes

  • Using image to video for exact choreography. If the moves must match a real take, start from that take.
  • Using video to video to change the camera. It will not. Generate a new clip.
  • Uploading a long, shaky clip. Check the limits first: 2 to 10 seconds for FLUX Video Edit [fast], 4 to 30 seconds and 480p to 720p for Object Swap. Trim to the part you need, because most video edits are billed per second of the clip.
  • Describing the image again in image to video. Spend the prompt on motion, camera and sound.
  • Not checking faces and labels. Both inputs can drift on small details. Watch the result at full size before you post it.

FAQ

Is video to video better than image to video?

Neither is better. Video to video keeps real motion and changes content. Image to video keeps an exact look and invents motion. Choose by which of the two you already have and want to keep.

Which one costs less?

It depends on length. A typed edit with FLUX Video Edit [fast] is 2.4 credits per second, so a 5-second edit is 12 credits. A 5-second image-to-video clip on Seedance 2.5 Flash at 480p is 28 credits. Object swaps at 720p or 1080p cost more per second. The exact cost shows before you run.

Can video to video change the person in my clip?

Yes, with Character Replacement: a clip plus one photo of the new person, who must have agreed. The motion, camera and scene stay.

Does video to video keep the sound?

FLUX Video Edit [fast] is described as keeping the source audio. For other tools, check the sound option on the tool page before you run.

Pick your input and start. Have a picture? Open VdoBloom Image to Video. Have a clip? Open the AI Video Editor.

Related reading: Best video-to-video AI, Replace a product in a video with AI, Text-to-video vs image-to-video.

Try it yourself

Image to Video

Pick a model, add a photo or a prompt, and see the credit price before you generate. Pay per use with credits that never expire.