P-Image-Edit: AI Image Editor Online

AI Image EditorFrom 6 credits★ 3.7 / 5Moderate content filterUpdated October 2026
Generate with P-Image-Edit

Bottom line

P-Image-Edit is Pruna AI's multi-photo editor on VdoBloom: up to 10 photos, a written instruction, output sized to your reference, a flat 6 credits per edit. Open the Image Edit tool, select P-Image-Edit, upload your image, and the exact credit cost appears before the edit runs.

Example output generated with P-Image-Edit

P-Image-Edit is an AI photo editor from Pruna AI (model prunaai:2@1) that VdoBloom runs on Runware. You upload one to ten photos, describe the change in up to 2,000 characters, and it returns the edited image. The output keeps the dimensions of your reference photo. Every edit costs a flat 6 credits, about $0.39 at the Lite one-time rate, however many photos you attach. New accounts get 10 free credits, enough for one edit.

It suits quick, repeatable edits on photos that are already the right shape: product touch-ups, background swaps, combining a subject with a style reference. It does not suit jobs that need a new aspect ratio, a resolution tier or a masked area. The editor shows an aspect-ratio menu for P-Image-Edit, but VdoBloom does not send that setting on edits, so crop your photo first. For a cheaper editor with a size choice, Qwen Image 2.1 Edit costs 3 credits at 1K.

P-Image-Edit specs at a glance

These values come from VdoBloom's image-edit endpoint, the Runware service for prunaai:2@1 and the credit table. The key fact is that the output follows your reference photo. VdoBloom sends only the prompt and the photos, with no width, height or ratio.

SpecP-Image-Edit on VdoBloom
Price6 credits per edit, flat (credit key p-image-edit)
Input photos1 to 10 per job
PromptRequired, up to 2,000 characters
Output sizeAuto-matched to the reference photo (the provider's 1K class)
Aspect-ratio menuShown in the editor but not sent on edits; the output keeps your photo's shape
Resolution choiceNone
Mask editingNot supported (instruction-only)
Speed settingPruna's turbo mode is off (full-detail mode)
Runs onRunware (prunaai:2@1)
Content filterModerate (VdoBloom's default tier)
Where to use itImage Edit tool: /ai-photo-editor/?model=p-image-edit

What P-Image-Edit costs

Every edit costs 6 credits. Adding a second or tenth reference photo does not change the price. The cost is shown before you confirm. If the provider fails or its moderation blocks the edit, the credits are refunded automatically. Dollar figures use the Lite one-time pack: 300 credits for $19.50, about 6.5 cents a credit, and those credits never expire.

JobCreditsAbout (Lite one-time)
1 edit (any number of photos up to 10)6$0.39
4 edits on one product photo24$1.56
20-photo catalogue, one edit each120$7.80
Edits per 300-credit Lite pack50$19.50 for the pack
Edits on the 10 free signup credits1 (4 credits left)Free

P-Image-Edit vs other multi-photo editors

Several VdoBloom editors take up to 10 photos. They differ mainly in price, in whether you control the output size, and in content tier.

P-Image-EditQwen2 Image EditQwen Image 2.1 EditNano Banana Edit
Credits6 flat6 flat3 at 1K, 5 at 2K5 flat
Input photosUp to 10Up to 10Up to 10Up to 10
Output sizeFollows reference8 ratios9 ratios plus auto, 1K / 2K10 ratios, incl. 4:5 and 21:9
Prompt limit2,000 chars5,000 chars5,000 charsNot listed
Mask editingNoNoYesNo
Content filterModerateFlexibleFlexibleStrict
Picker rating3.74.04.64.2

Read more: Qwen Image 2.1 Edit · Qwen2 Image Edit · Nano Banana Edit

When P-Image-Edit is the right pick

Choose P-Image-Edit when keeping the source frame matters more than choosing a new one.

  • Your photos are already the size and shape you need, and the edit should keep them that way.
  • You want a fixed price per edit no matter how many reference photos you attach.
  • You want the Moderate content tier rather than Strict (Nano Banana Edit) for everyday product and lifestyle edits.
  • Pick something else for a new aspect ratio (Qwen2 Image Edit, Qwen Image 2.1 Edit), a 2K output (Qwen Image 2.1 or 3.0 Edit), or a masked area (Qwen Image 2.1 Edit, FLUX Erase).

Prompting P-Image-Edit

P-Image-Edit reads one instruction against all your photos, so a short, specific prompt works better than a scene description.

  • Describe the change, not the photo: 'Change the bottle colour to matte black; keep the label text and lighting.'
  • With several photos, assign a role to each: 'Photo 1 is the product, photo 2 is the background, photo 3 sets the colour grade.'
  • Crop before you upload. The output keeps your reference photo's dimensions, so the crop decides the shape.
  • Stay under 2,000 characters. The editor and the service both stop there.
  • If an edit misses, change one thing in the prompt at a time. Each retry costs the same 6 credits.

Common problems and fixes

Most P-Image-Edit surprises come from how the model sizes its output and from the prompt rules in VdoBloom's service. A failed edit is refunded automatically.

What you seeCauseFix
The aspect ratio did not changeThe ratio menu is not sent on edits; output follows the referenceCrop the photo before uploading, or use Qwen2 Image Edit for a chosen ratio
'Prompt is required'Empty instructionWrite one clear sentence describing the change
'Maximum 10 images allowed'More than 10 photos attachedKeep the photos that carry the subject, background and style
Too much of the photo changedNo mask; the instruction applies to the whole imageName what must stay the same, or use Qwen Image 2.1 Edit's mask mode
Output is small for printThe model works in its 1K classEdit at 2K on Qwen Image 2.1 Edit or Qwen Image 3.0 Edit (5 credits each)
'The provider's content moderation blocked this edit'Provider-side safety checkCredits are refunded; adjust the prompt or photo

Pick an editor by job

If you are comparing editors rather than committed to P-Image-Edit, this table uses only price and code-level limits.

Edit jobModelCredits
Keep each photo's exact dimensionsP-Image-Edit6
Cheapest instruction editQwen Image 2.1 Edit (1K)3
Choose a new output ratio, PNG or JPEGQwen2 Image Edit6
2K output at a flat priceQwen Image 3.0 Edit5
Strict content tier, up to 10 photosNano Banana Edit5
Remove an object with a maskFLUX Erase10

Limits and weak cases

P-Image-Edit cannot change the output's aspect ratio or resolution. The ratio menu in the editor has no effect on edits, and there is no 2K or 4K tier. It has no mask input, so you cannot confine a change to one painted area. There is no text-to-image mode on VdoBloom, and every job needs a prompt and at least one photo. Its picker rating (3.7) is the lowest of the editors in the table above, and Qwen Image 2.1 Edit costs less at 1K. VdoBloom checks every edit prompt for nudity, and edits blocked by the provider are refunded.

What creators use P-Image-Edit for

  • High-volume product photo touch-ups at a fixed 6 credits each, keeping each photo's original dimensions.
  • Multi-photo composites: a product, a background plate and a style reference combined in one instruction (up to 10 photos).
  • Repeating one instruction across a batch of same-size photos so every output matches the source frame.
  • Trying several phrasings of an edit at a predictable cost before moving the best one to a higher-resolution editor.

How to use P-Image-Edit on VdoBloom

  1. 1Open the Image Edit tool and select P-Image-Edit.
  2. 2Upload the image(s) to edit and describe the change you want.
  3. 3Review the credit cost and generate. Results appear in your library.

Frequently asked questions

What is P-Image-Edit?

P-Image-Edit is Pruna AI's image editing model (prunaai:2@1). On VdoBloom it edits one to ten uploaded photos from a written instruction and returns an image at your reference photo's dimensions, for 6 credits per edit.

How much does P-Image-Edit cost?

A flat 6 credits per edit, whether you attach one photo or ten. At the Lite one-time rate ($19.50 for 300 credits) that is about $0.39 an edit, or 50 edits per pack.

Can I try P-Image-Edit for free?

Yes. New accounts get 10 free credits, enough for one P-Image-Edit run with 4 credits left over.

Why does the aspect-ratio setting not change my P-Image-Edit result?

VdoBloom does not send a ratio, width or height to P-Image-Edit on edits; the model matches the output to your reference photo. Crop the photo to the shape you want before uploading. If you need to pick the output ratio, use Qwen2 Image Edit or Qwen Image 2.1 Edit.

How many photos can P-Image-Edit take?

Up to 10 per job, all used by the same instruction. Say in the prompt what each photo is for.

Does P-Image-Edit support masks?

No, it is instruction-only. For edits limited to a painted area, use Qwen Image 2.1 Edit's mask mode or FLUX Erase.

How long can a P-Image-Edit prompt be?

Up to 2,000 characters, and a prompt is required. Qwen2 Image Edit and Qwen Image 2.1 Edit accept up to 5,000.

P-Image-Edit vs Qwen2 Image Edit: which is better?

Same price (6 credits) and the same 10-photo limit. Qwen2 Image Edit lets you choose the output ratio and PNG or JPEG and takes longer prompts. P-Image-Edit keeps your photo's own dimensions. Qwen2 is in the Flexible content tier, P-Image-Edit in Moderate.

Is P-Image-Edit censored?

It is in VdoBloom's Moderate content tier, the platform default, which sits between Flexible (Qwen) and Strict (Nano Banana, GPT Image). VdoBloom checks every edit prompt for nudity, and edits blocked by the provider are refunded.

Why did P-Image-Edit barely change my photo?

Usually the prompt describes the scene instead of the change. Rewrite it as one clear instruction and name what must stay the same. If the job fails outright, the 6 credits are refunded.

P-Image-Edit guides, prices and comparisons

This page is the P-Image-Edit hub. Each guide below goes deeper on one question and links back here.

Related models